Custom Electronic Packaging Boxes

Custom boxes for electronics, chargers and accessories, with EVA or paper inserts and printed sleeves. Rigid or folding board, low MOQ, free quote.

Electronics packaging has to pass a drop test before it can be judged on appearance. The product is dense, the accessories are numerous, and the retail box has to survive a courier journey without the corners deforming.

That makes the insert the critical component. Foam holds the device; a card platform holds the accessories; the outer box holds everything together. Getting the layers right is what separates a box that arrives intact from one that does not.

Specifications

Structure Rigid box or folding carton with fitted insert
Board Greyboard 2 mm wrapped; or 350 gsm SBS carton
Printing CMYK offset plus Pantone; matte or soft-touch
Finishing Matte lamination, spot UV, foil, emboss
Insert EVA foam, EPE foam, moulded pulp, die-cut card
Accessories Card tray for cables, manual and adapters
Size Built to device dimensions
MOQ 500 pcs per design
Sample 5-7 working days
Bulk production 18-22 working days

Insert engineering for fragile devices

  • EVA foam gives the best protection per millimetre and can be die-cut to the device outline. It is the default for anything with glass or a screen.
  • Moulded pulp replaces foam where the brand has an environmental position. It protects well but needs a deeper box because the walls are thicker.
  • Die-cut card platforms hold accessories flat and keep the box shallow. A separate tray under the device is the standard layout for phones and audio.
  • 2 mm greyboard for the outer, because a rigid box carries the drop load better than a folding carton at the same external size.
  • Matte lamination on electronics boxes hides handling marks and reads more premium than gloss, which shows fingerprints on a shelf.

Where electronics packaging is used

  • Consumer electronics and audio
  • Smart home devices
  • Computer accessories and peripherals
  • Small appliances
  • Cables, adapters and spare parts

Ordering and lead times

Minimum order is 500 pieces per design. A printed digital sample takes 3-5 working days and is charged at sample cost, credited against the bulk order. Bulk production runs 15-20 working days after artwork approval and deposit, and sea freight to Europe or North America adds 25-40 days. If your launch date is fixed, plan backwards from the freight date rather than from production.

Send a reference image, your product dimensions and the destination market, and we will come back with a specification and a quotation rather than a price list.

Frequently asked questions

Will the box survive a drop test?

With an EVA insert cut to the device outline and 15 mm of foam at each corner, yes for standard 1 m drop tests. We recommend testing the actual sample rather than relying on the specification.

Can we use pulp instead of foam?

Yes, and it is increasingly requested. Pulp needs a deeper box and a longer tooling lead time, but it removes plastic entirely and can be recycled with the carton.

Is the box suitable for retail display?

Yes. The standard layout – device on top, accessories in a tray below – is what most retail electronics use, and it presents well when the lid is lifted.

Electronics packaging in production

Custom electronic packaging box with foam insert - view 1
Custom electronic packaging box with foam insert - view 2
Custom electronic packaging box with foam insert - view 3
Custom electronic packaging box with foam insert - view 4
Custom electronic packaging box with foam insert - view 5
Custom electronic packaging box with foam insert - view 6
Share to

Send Message

Inquiry
close slider
Edit | Entries | Preview | Duplicate | Delete