EUDR for Paper Packaging: What Changes on 30 December 2026

Kraft paper bags of different sizes beside a rolled due diligence certificate and a green leaf stamp, illustrating EU Deforestation Regulation compliance for paper packaging

Regulatory briefing · Reviewed by the Hrenary compliance team · Updated November 2026

On 30 December 2026 the EU Deforestation Regulation starts to apply to large and medium-sized operators. For anyone selling paper packaging into Europe, that is the date the paperwork changes — not the product, and not the price list, but the evidence the goods are allowed to move at all.

Most packaging buyers still assume this is a timber trader problem. It is not. Wood is one of the seven regulated commodities, and Annex I of the regulation covers pulp and paper of Combined Nomenclature chapters 47 and 48. Kraft paper, duplex board, printed folding cartons, corrugated cases and paper bags all sit inside that description.

This article sets out what the regulation requires, which packaging is in scope and which is not, who carries the legal obligation, what a European importer will ask a Chinese converter for, and what to fix in the weeks that remain. It is written from the supplier side of the table, because that is where the data has to come from.

The baseline

What the regulation actually requires

Stripped of the recitals, a relevant product may only be placed on the EU market, made available on it, or exported from it if three conditions are met simultaneously:

  1. It is deforestation-free. The commodity was produced on land that was not deforested after 31 December 2020. For wood, the timber must also have been harvested without forest degradation after that date. The 2020 cut-off is fixed — there is no phase-in and no grandfathering of land cleared in 2021.
  2. It was produced in accordance with the relevant legislation of the country of production. This covers land-use rights, environmental protection, forestry rules, labour rights, tax and customs. Legality and deforestation-free status are separate tests; a product can be perfectly legal and still fail the first condition.
  3. It is covered by a due diligence statement (DDS). Filed electronically in the Commission’s Information System before the goods are placed on the market, and referenced in the customs declaration.

A DDS is not a certificate of compliance issued to a factory. It is a declaration by the operator, backed by the operator’s own due diligence file, for which the operator is liable. That distinction matters commercially, and it is the source of most of the confusion in this market.

Dates

The timeline, including the two postponements

The regulation has moved twice. Anyone working from a 2023 or 2024 compliance deck is working from superseded dates.

DateWhat happenedWhy it matters
31 May 2023Regulation (EU) 2023/1115 adopted; in force 29 June 2023Legal basis; Annex I defines the product scope
30 Dec 2024Original application dateSuperseded — never applied
19 Dec 2024Regulation (EU) 2024/3234 postpones application by 12 monthsMoved to 30 December 2025
22 May 2025Implementing Regulation (EU) 2025/1093 — country risk listChina classified low risk; Brazil, Indonesia, Malaysia standard
19 Dec 2025Regulation (EU) 2025/2650 agreedFinal dates; chapter 49 printed products removed from Annex I
May 2026Commission simplification packageReduced documentation burden; updated guidance in all EU languages
13 Jul 2026Delegated Act on product scope + Implementing Act on the Information SystemAnnex I rewritten; simplified declarations for micro and small primary operators
18 Sep 2026Delegated Regulation (EU) 2026/2102 applies to hides, skins and some rubber goodsLeather and cowhide entries deleted from Annex I
23 Sep 2026TARIC document codes revisedNew code Y190 for packaging used only to carry another product
30 Dec 2026Applies to large and medium operatorsAlso applies to micro and small operators already covered by the EU Timber Regulation
30 Jun 2027Applies to remaining micro and small operatorsDoes not cover paper — see below
30 Dec 2027Products newly added by Delegated Regulation (EU) 2026/2102Soluble coffee, certain palm oil derivatives, frozen cattle tongues
Current as of November 2026. The Commission’s own implementation page is the authoritative source; national competent authorities publish additional guidance.
The paper trap: no SME deferral
Micro and small operators normally get until 30 June 2027. That concession does not apply to businesses already covered by the EU Timber Regulation — and pulp and paper were covered. So a small converter or trader handling paper gets 30 December 2026, the same date as a multinational. In practice this removes the extra six months most small paper businesses assume they have.
Scope

Is your packaging in scope? The test is use, not just the code

Annex I lists chapters 47 and 48 with the prefix ex. The ex means only the part of the heading that consists of the regulated commodity is covered: wood-based pulp and paper. Bamboo, rattan, reed and straw papers are excluded by Note 4 to Annex I, and so are recovered and waste paper under headings 4706 and 4707.

The second test is commercial rather than chemical. The same carton can be regulated or exempt depending on how it is placed on the market.

ItemIndicative CN codeStatusWhy
Kraft paper or board sold as a product4804, 4805In scopeChapter 48 goods placed on the market in their own right
Printed folding carton, sold empty4819In scopeThe packaging is the product being sold
Paper bag or gift box, sold empty4819In scopeSame rule — the bag is the article traded
Wooden pallet, sold empty4415In scopePlaced on the market as a product
Carton used to ship your own goods4819ExemptUsed solely to support, protect or carry another product — TARIC code Y190
Pallet carrying your own goods4415ExemptSame exemption, applied to wood packaging
Books, catalogues, brochures, magazinesChapter 49Out of scopeChapter 49 deleted from Annex I by Regulation (EU) 2025/2650
100% recycled paperboard4707 and derivedOut of scopeRecovered material excluded by Annex I
Bamboo or straw paperChapter 48, bambooOut of scopeNote 4 to Annex I
Board with 20% virgin fibre4805 / 4810In scopeAny virgin fibre share brings the product back in
Codes are shown at heading level and are indicative only. Classification is per article, not per company; confirm each SKU against the consolidated Annex I.

The practical consequence for a converter is narrow and important. A paper bag sold empty to a European retailer is a relevant product. The same bag, filled with a product and handed to a consumer at the till, is packaging doing its job and falls outside the regulation. The obligation attaches at the point where the bag is traded as an article — which is exactly the point at which a converter ships it. Our specification chart is a useful place to start reading an SKU: paper grade, coating and handle type are the fields that drive both cost and scope.

Two further carve-outs are worth knowing. Waste, used goods and second-hand products are outside the regulation, and an item made entirely from material that has completed its lifecycle can be documented under TARIC code Y133. But a by-product of a manufacturing process is not waste — sawdust and wood chips remain in scope under 4401, because they have not finished their lifecycle.

Roles

Who is legally responsible — and who is not

The obligation sits on the operator: the first business to place the product on the EU market or to export it. A Chinese factory is not an operator, is not registered with a competent authority, and cannot be fined under this regulation. That fact is often used to end the conversation, and it is misleading.

PartyRole under EUDRWhat they must actually do
EU importer or EU brand buying directly from AsiaOperatorFull due diligence file, risk assessment, DDS in the Information System before release for free circulation, retain records 5 years
EU brand buying from an EU converterDownstream operatorCollect and reference the upstream DDS number; register in the system if not an SME; no new DDS for the finished bag
Non-EU converter (the factory)Not an operatorSupply the data that makes the importer’s DDS possible: species, origin, geolocation, mill, batch
EU trader buying and resellingTraderKeep DDS references for everything bought and sold; non-SME traders register and report
Micro/small primary operator in a low-risk countrySimplified regimeOne-off simplified declaration instead of a DDS per shipment
Roles are assigned per product and per transaction, not per company. A business can be an operator for imported pulp and a downstream operator for paper it buys inside the EU.

The commercial reality is that a DDS cannot be filed without factory data. When an importer cannot obtain plot-level origin for a consignment, the lawful outcome is not a weaker declaration — it is that the goods cannot be placed on the market. The regulation makes the importer liable, so the importer passes the requirement upstream as a purchase condition.

The data pack

What your EU customer will ask you for

Requests vary between importers, but the underlying list comes from Article 9 and converges on eight items. A supplier who can answer all eight without delay has a commercial advantage that is difficult to compete with on price alone.

  1. CN code per SKU. Not the Chinese export code — the EU Combined Nomenclature code, at ten digits where the importer needs it.
  2. Species. Scientific name of the fibre, not “mixed pulp”. For board this is normally softwood and hardwood kraft plus recovered fibre, with the share of each.
  3. Country and region of harvest. Where the tree was felled, which is frequently not where the paper was made.
  4. Mill identity. Paper mill name, site and address, plus the pulp mill if different.
  5. Geolocation of the plots. Polygons for plots over 4 hectares, a single point for plots of 4 hectares or less, in decimal degrees, longitude first.
  6. Production date or period. Enough to tie the consignment to a harvest window.
  7. Quantity. Net mass per product and per shipment, consistent with the commercial invoice.
  8. Legality evidence. Harvest permits, FSC or PEFC chain-of-custody numbers where held, and the mill’s own legality declaration.

One item is routinely missed: a mapping between the DDS and the actual batch. A single DDS reference covers a defined quantity of a defined product from defined plots. If a converter ships three grades from two mills under one reference, the importer’s declaration is inaccurate even though every document exists. Build the data pack per shipment, not per customer.

The hard constraint

Geolocation is the part that breaks

A converter cannot produce plot coordinates, because the plots belong to the pulp mill’s supply basin. This is the structural bottleneck in the whole chain, and it is where orders stop.

The workable answer is a per-grade data sheet from the mill, issued once and refreshed when the sourcing basin changes. European mills have been issuing these since 2024, and the larger Asian mills now do the same for export grades. If a mill will not provide plot-level data for a grade, that grade cannot be sold into the EU after 30 December 2026 without exposing the importer.

Three technical details cause avoidable rejections in the Information System:

  • Coordinates entered in the wrong order. The system expects longitude before latitude; reversed pairs validate as a location in the ocean and fail the cross-check against Copernicus forest cover.
  • Polygons that are not closed, or that self-intersect. A polygon needs at least four points with the first repeated at the end.
  • One point used for a large estate. Above 4 hectares a polygon is required; a single point is only accepted for plots of 4 hectares or less.
Risk tiers

Country risk: China is low risk, and that is not the whole story

Article 29 creates three tiers, set by Implementing Regulation (EU) 2025/1093 of 22 May 2025. Four countries are high risk, roughly 140 are low risk, and everything else defaults to standard.

TierExamplesDue diligence requiredMinimum checks by authorities
Low riskChina, all EU member states, UK, US, Canada, Japan, Australia, India, VietnamSimplified: collect information and confirm negligible risk; risk assessment and mitigation steps waived1% of operators
Standard riskBrazil, Indonesia, Malaysia, Côte d’Ivoire, Colombia, EcuadorFull: collect, assess, mitigate until risk is negligible3% of operators
High riskBelarus, Myanmar, North Korea, RussiaFull, plus enhanced scrutiny9% of operators and 9% of volume
Tiers are reviewed periodically; the first review was scheduled for 2026. Standard risk is the default for any country not on the published lists.

China being low risk is genuinely useful: the risk assessment and mitigation steps fall away, and inspection exposure is the lowest of the three tiers. It does not remove the information obligation. Geolocation, species, origin and legality evidence are still required in full — the simplification is procedural, not documentary.

The point most Chinese converters miss
The tier follows the country where the wood was harvested, not the country where the bag was made. Board produced in Shandong from Brazilian eucalyptus pulp is a Brazilian-origin commodity at standard risk, and the importer must run full due diligence on those plots. Low-risk status for China helps only where the fibre itself originates in China or another low-risk country. Ask your mill where the pulp comes from before promising a customer a simplified process.

This is also why the origin question is more commercially sensitive than it looks. A switch from imported to domestic or low-risk pulp can move a product from full due diligence to simplified due diligence, and that is worth quantifying with a mill before a tender rather than after.

Clearance

Customs: what goes on the declaration

The regulation adds document codes to the customs declaration; the commodity code itself does not change. Without a valid code the declaration is blocked, whatever the goods are.

CodeUse it when
C716A due diligence statement covers the goods — the DDS reference number goes in the declaration (standard case)
C717A micro or small primary operator’s simplified declaration covers the goods
Y129The code is an “ex” heading but this specific product is outside scope (bamboo paper, for example)
Y132The goods were produced before 29 June 2023
Y133Used or second-hand goods, waste, recovered or end-of-life material
Y141Transitional relief for micro and small enterprises established before 31 December 2024 — usable only to 29 June 2027, and not for paper
Y187Samples and products consumed in testing or analysis
Y190Packaging used only to carry another product — the code that applies to shipping cartons and pallets
Y191Inputs used in the manufacture of medicinal products, and accompanying marketing material
TARIC document code list as revised on 23 September 2026. Exemption codes document a position; they do not create one.

A detail worth flagging to shipping teams: EUDR codes are entered in the documents section of the declaration. Goods may enter customs warehousing, inward processing or transit without a DDS, but a DDS is required at release for free circulation. Consolidating a shipment is not a way around the requirement, and a DDS flagged for inspection will hold the consignment.

Enforcement

Penalties, and why the importer will not absorb the risk

Member States set the penalties, within a harmonised floor. The minimum maximum fine must be at least 4% of the operator’s total annual Union-wide turnover in the preceding financial year. Alongside fines, authorities can confiscate the goods and the revenues from the transaction, exclude the business from public procurement and from access to public funding, and temporarily prohibit placing products on the market or exporting.

Records must be kept for five years, and non-SME operators must publish an annual report on their due diligence. For an importer weighing a 40,000-euro order against a 4% turnover penalty and possible delisting from a retail supply chain, the calculation is not close. This is why the documentation request arrives as a condition of purchase rather than as a favour.

Practice

Five failure modes we see in supplier audits

  1. “It is recycled, so it is exempt.” Correct only if the product is made entirely from recovered material. A 90% recycled board with 10% virgin fibre is in scope, and due diligence then concerns the plots behind that 10%. Ask the mill for the virgin share per grade, not the recycled claim.
  2. Passing on a mill reference without a batch mapping. The importer declares a quantity against a DDS. If the reference covers a different tonnage or grade, the declaration is inaccurate on its face.
  3. Buying an “EUDR certificate”. There is no third-party certificate and no accreditation that can be resold to a supplier. What exists is an operator’s DDS, filed under the operator’s liability. Anyone offering a transferable certificate is selling a document with no legal effect.
  4. Sending data after the vessel sails. The DDS must exist before the goods are placed on the market. Late data means the container waits, and storage at destination is charged to somebody.
  5. Assuming an SME deferral. Paper was covered by the EU Timber Regulation, so the 30 June 2027 date does not apply. This single misunderstanding accounts for most of the unprepared small converters we speak to.
Checklist

A six-week plan for the deadline

With application on 30 December 2026, the sequence that works is short and unglamorous.

WhenActionOutput
Week 1Screen every export SKU: CN code, virgin versus recovered share, coating, handle materialScope list, with the in-scope SKUs ranked by EU revenue
Week 2Request a per-grade EUDR data sheet from each paper mill; record who can supply plot data and who cannotGap list by grade and by mill
Week 3Build a per-shipment data pack template; agree the format with your three largest EU customersOne template both sides accept
Week 4Dry run a single shipment end to end, including geometry validationA working example, and the errors found before they cost a container
Week 5Add an origin and documentation clause to quotations and order confirmationsContractual clarity on who supplies what, and by when
Week 6Brief sales: which claims are safe to make, and which are notNo promises about certification that does not exist
This is a documentation programme, not a product change. Nothing in the regulation requires a different bag; it requires evidence about the fibre inside it.

Two regulatory tracks now run in parallel for packaging, and they are frequently confused. The EUDR is about where the fibre came from; the Packaging and Packaging Waste Regulation is about what happens to the pack after use — recyclability, recycled content, minimum design requirements. A bag can be fully recyclable and still fail the EUDR, or be deforestation-free and fail the PPWR design rules. Buyers increasingly ask for both in the same questionnaire.

FAQ

Frequently asked questions

Does the EUDR apply to paper bags?
Yes, when the bag is placed on the market as a product in its own right — which is the case for a bag sold empty to a retailer. A bag used only to carry another product falls outside the regulation and is declared under TARIC code Y190. The distinction is the use, not the material.
Is a Chinese converter an “operator” under the regulation?
No. The obligation sits on whoever first places the product on the EU market, which is normally the EU importer. The converter has no registration or filing duty, but it holds the data without which the importer cannot file. Commercially that is the same pressure.
Does recycled paper need due diligence?
A product made entirely from recovered material is outside Annex I, so no. As soon as virgin fibre is blended in, the product is in scope and due diligence applies to the plots behind the virgin share. Document the recovered percentage per grade rather than claiming “recycled”.
What happens if the paper mill will not provide geolocation?
The importer cannot file an accurate DDS, so the goods cannot lawfully be placed on the market. In practice the order either moves to a grade with available data or does not ship. This is a sourcing decision, and it is better made before a purchase order than after.
Is there an EUDR certificate I can buy?
No. There is no accredited certificate and nothing transferable. What exists is the operator’s due diligence statement, filed under the operator’s own liability, supported by a file the operator must keep for five years.
Do the same rules apply in the UK?
The EUDR applies in Northern Ireland under the Windsor Framework, and does not apply in Great Britain. The UK government has announced its intention to introduce its own deforestation rules and to align scope and information requirements, but as of November 2026 those rules are not in force.
What is the actual deadline for a small paper business?
30 December 2026, not 30 June 2027. The later date applies to micro and small operators that were not already covered by the EU Timber Regulation; pulp and paper were covered, so the timber exception applies and the deferral is unavailable.
Need the fibre data behind a quotation?
Send us the SKU list you ship into the EU. We will return a scope screen by CN code, the virgin-versus-recovered share for each grade, and the mill documentation we can supply — normally within three working days.
Request an EUDR data pack

This briefing summarises Regulation (EU) 2023/1115 as amended, including Regulation (EU) 2025/2650, Delegated Regulation (EU) 2026/2102 and the TARIC document code revision of 23 September 2026. It reflects the position in November 2026 and is provided for commercial orientation, not as legal advice. Confirm classification and obligations against the consolidated Annex I and with your own counsel before relying on them for a market-access decision. Related reading: custom paper bags buyer’s guide, paper bag specification chart, how to source packaging responsibly.

Share to
Inquiry
close slider
Edit | Entries | Preview | Duplicate | Delete